P1246
Description of the defect
Generator Load Input Failed
The PCM monitors generator load from the generator/regulator in the form of frequency. The frequency range is determined by the temperature of the voltage regulator where 97% represents full load, below 6% means no load.
Possible causes
List of elements that might trigger the appearance of this code
- Generator circuit short to GND
- Generator circuit short to PWR
- Generator circuit open
- Generator drive mechanism
- Damaged generator/regulator assembly
- Damaged PCM
Diagnostic help
Some tricks to help us for the diagnosis of the failure
Verify battery voltage is 14.5V.
Verify generator/regulator has the correct part number.
DPF or catalyst problems ?
Discover our FAP CLEANER solution
|
The Carbon Cleaning ?
Prevents maintenance on engine problems
Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts, such as a new turbocharger ($ 1.350 - 3.100), catalytic converter ($ 600 - 2.000), DPF ($ 600 - 2.000) or EGR valve ($ 370 - 500).
These problems result mainly from poor combustion, which stifles the engine.
So before replacing your engine parts, try Carbon Cleaning. A dirty engine as the result of carbon deposits is the new threat to vehicle performance.
Make your online diagnosis
|
|
|